|
|
|
|
Blog by JasmineCorp | Create your own Blog
|
RSS Feed | Login |
the blog of car diagnostic tool
|
Pages 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | |
Autel MaxiSYS Pro MS908P Key Erase Issue on 2000 Ford Focus (fixed)By peipei yang at 2017-10-30 02:47:27
|
Write this blog to share my problem about Autel MaxiSys Pro MS908P key erasure on 2000 ford focus and its solution with you 1.1
2000 Ford Focus Z-Tech Diagnostic tool used:
Autonumen.com Autel MaxiSYS MS908P Issue description:
I intended to replace the PCM in my vehicle With followed all the instruction for key erasure, the MS908P seemed to freeze at the 9 second make on the task bar
Reasons:
The engine told me that I could only program new third key with having 2 already pro Read More.....
|
Permalink | Comments (0) |
BMW ICOM A2 Solid Drive SSD black screen solution By peipei yang at 2017-10-12 02:54:28
|
Problem:
When install BWM ICOM A2 Super ICOM SSD (Solid Drive) on Lenovo ThinkPAD laptop, the windows turns to black screen.
Solution 1. Set computer/laptop to achi mode 2.Make sure your computer time is your local time. 3.PC has at least 4GB RAM
Support all SATA format laptop or computer which has 2GB(Recommend 4GB) memory. Laptop Hardware requirements: CPU: Intel Celeron 2.0 and above (i5 Recommend) RAM: 2Gb and above (4Gb Recommend) USB: 2.0 and above
Better use Dell D630 Read More.....
|
Permalink | Comments (3) |
V16.8 Porsche Piwis Tester 2 Porsche Piwis Tester II vci not detcted solutionBy peipei yang at 2017-10-10 02:38:23
|
V16.8 Porsche Piwis Tester 2 software is new Porsche Piwis software. Porsche Piwis Tester II vci software need set up before using. customer had the “No VCI has been detected” error when set up Porsche Piwis Tester 2. Below OBD2 Scanner sharing V16.8 Porsche Piwis Tester 2 Porsche Piwis Tester II vci not detcted solution.
Professional Diagnostic Tools Porsche piwis tester 2 with V16.8 porsche piwis software installed LENOVO E49 laptop 5.1
Porsche piwis tester 2 with V16.8 porsche piwi Read More..... |
Permalink | Comments (0) |
V2017.5 BMW ICOM Software What Worked? By peipei yang at 2017-09-28 22:51:37
|
V2017.5 BMW ICOM software has been updated to ISTA-D 4.05.20 ISTA-P 3.61.4.002. And here are ISTA-D 4.05.20 ISTA-P 3.61.4.002 on windows 7 reviews… here you go.
Great Job !!! and perfect instruction for install. I personally went for VM WS installation, because portability is a very important issue for me. For those run out of diskspace, like me, I suggest to install Ista+ in VMware WS Ver 12x with Win7 x64 Guest. Earlier VMware versions down to 10 probably will work as well. Disks Read More.....
|
Permalink | Comments (1) |
2017.07 MB SD Connect C4/C5 software can’t be used normally ?By peipei yang at 2017-09-26 03:19:04
|
Recently many customers reflect that when they run MB STAR C4 C5 xentry diagnostic software, it will ask you to enter user name and serial number. What happen to us ?
15.1
We help customer to remote control with teamviewer and we found that the hard driver (HDD) was not buy from our company. Customer meet this problem because they try to copy the software from our HDD. Our hard drive is encrypted and not allowed to replicate. A copy of the new hard disk software will appear this proble Read More.....
|
Permalink | Comments (0) |
Pages 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | |
|