|
|
|
|
Blog by JasmineCorp | Create your own Blog
|
RSS Feed | Login |
the blog of car diagnostic tool
|
Autel MaxiSYS Pro MS908P Key Erase Issue on 2000 Ford Focus (fixed) By peipei yang at 2017-10-30 02:47:27
|
Write this blog to share my problem about Autel MaxiSys Pro MS908P key erasure on 2000 ford focus and its solution with you 1.1
2000 Ford Focus Z-Tech Diagnostic tool used:
Autonumen.com Autel MaxiSYS MS908P Issue description:
I intended to replace the PCM in my vehicle With followed all the instruction for key erasure, the MS908P seemed to freeze at the 9 second make on the task bar
Reasons:
The engine told me that I could only program new third key with having 2 already programmed keys, which meant that I couldn’t program new key if I did not have 2 working Keys
Solution:
1.Download the beta version V6.12.10 to have a test.
2.Try to program key manually. The process bar will appear for 10s after key erasure. Please ignition off and program it as followed
Turn the ignition key to position 0
Cycle keyl in the ignition from OFF to RUN for at least 3 seconds
Cycle key2 in the ignition from OFF to RUN for at least 3 seconds
Cycle keyl in the ignition from OFF to RUN for at least 3 seconds
Two keys are programmed now http://www.autonumen.com/goods-5229-Autel+Maxisys+Elite+with+J2534+ECU+Programming.html
|
Permalink | Comments (0) |
Comments
|
To add a comment please login by clicking here
|
|